Great
Grip Color Option Stair Treads are designed to enhance
the safety and beauty of every architectural installation.
They are made with a high content of Aluminum oxide abrasive
grit for long life and lasting beauty. The surface of Great
Grip Color Option Stair Treads have easy maintenance
features and offers the greatest protection from the liability
of falls and injuries.
| Great
Grip Color Option Stair Treads Features: |
| Extruded
aluminum base—abrasive filler |
| Lengths
to order, up to 10'-0" max. in one piece. |
| Anti-slip
abrasive extending over radius of nose |
| High
content of aluminum oxide abrasive |
| 18
standard colors |
| "Clean"
architectural lines |
| Protective
tape available |
| Non-combustible
|
GREAT GRIP COLOR OPTION STAIR TREADS SPECIFICATIONS
Provide Great Grip Color Option Stair Treads type GG-1 safety nosings as suppllied by
Geoffrey Drew Marketing, Inc. a d/b/a of The Mat King for interior and exterior stairs.
- Nosing base to be type 6063-T5 extruded aluminum.
- Anti-slip filler shall contain not less than 60% virgin grain
Aluminum Oxide (AL2O3) abrasive
- Binder is to be fully-cured resilient type epoxy; epoxy binder to filler
ratio to be 13% minimum for improved cleanability.
- Epoxy/Abrasive filler shall extend over the curved front edge of nosing
and shall be securely bonded to the aluminum base.
- Type of anchor shall be as specified.
- Nosings shall terminate not more than 4" from ends of steps for poured
concrete stairs; for concrete filled steel pan stairs, nosings shall be full length
of steps less 1/8" clearance.
- Color shall extend uniformly throughout the filler; black color will be furnished
if no other color is specified.
- NOTE: Safety nosings going into new poured concrete or cement fill shall
be installed before "Initial Set" of the concrete or cement occurs.
Nosings shall finish flush with the top of the traffic surface.
|
|
 |
 |
 |
| Great
Grip Color Option Stair Treads Type GG-1 |
|