Sure
and Secure Safety Stair Treads |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sure and Secure Safety Stair Treads have been designed for both interior and exterior applications. They provide a heat-treated, corrosion resistant, extruded aluminum base with satin/lacquered finish. The diamond-hard aluminum oxide grit in the insert filler material assures long tread life under heavy pedestrian traffic use. Sure and Secure Safety Stair Treads feature a sturdy extruded aluminum base into which is inserted a rock solid abrasive filler made of a material with a high content of aluminum oxide (AL2O3) and which is available in eleven (11) standard colors that extend through the entirety of each insert. The treads are non-combustible and can be ordered in custom lengths up to 12’-0” (3.66 m) maximum in one continuous piece. Lengths required in excess of the maximum one-piece construction will be supplied in equal sections unless otherwise requested. Noncombustible. Protective tape available. Sure and Secure Safety Stair Treads are intended for pedestrian and light wheeled traffic. Click HERE to review the suggested way to evaluate existing such traeds and to determaine how to rejuvenate or what to do to make the area in question is safe to transverse. Sure and Secure Safety Stair Treads Architectural Specifications: • Provide Sure and Secure Safety Stair Treads type ___ safety nosings as produced by Geoffrey Drew Marketing, Inc. d/b/a The Mat King, for interior and exterior stairs. • Nosing base shall be type 6063-T5 extruded aluminum. • Anti-slip filler shall contain not less than 65% virgin grain Aluminum Oxide/Silicon Carbide abrasive. • Nosings shall be noncombustible as tested under Federal Test Method Standard No. 501a. Method 6411. • Type of anchor shall be specified. • Nosings shall terminate not more than 4" from ends of steps for poured concrete stairs; for concrete filled steel pan stairs, nosings shall be full length of steps less 1/8" clearance. • Color shall extend uniformly throughout the filler; black color will be furnished if no other color is specified. • Nosings shall finish flush with the top of the traffic surrtace.
Guidelines for the Installation of Sure and Secure Safety Stair Treads or Nosing into New Concrete or Steel Pan Filled Stairs: • The use of very large aggregate in the concrete mix may make placement of the safety nosing difficult. • Safety nosing placement may be difficult in concrete with very slow slump. • Place concrete into the stair forms or steel pans as quickly as possible; schedule pours so as to install the metal safety nosings quickly before initial set of concrete occurs. • Puddle the concrete, tamp the safety nosing to insure proper concrete formation around the anchors. • Remove protective tape (if used) as soon as practical. • Order nosings or treads well in advance of the pour or installation date. • Close stairway after pour; permit no use for 24 hours. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||