Heavy duty clinched selvage
belts are available in two different mesh sizes and four different
materials: low carbon galvanized steel, C-1045 bright high
carbon steel, T-304 stainless steel and T-316L stainless steel.
Clinched selvage belts can be ordered in any width from 10"
to 192". These belts feature a better wearing edge surface
than welded selvage for misaligned conveyor systems and they
mechanically prevent the belt from narrowing under heavy loads.
Additionally, heavy duty clinched selvage belts are just as
flexible as those with welded selvage.
| Please Note: Sprockets driving heavy duty
clinched selvage belts CANNOT be placed on the first drive
opening on either side of the belt. |
| CLINCHED SELVAGE BELT SPECIFICATIONS |
| Design |
Mesh |
Min.
Width |
Max.
Width |
Max.
Tension (lbs/Ft if width) |
Approx
Weight (lbs/SF) |
9691-311-0001 |
1"x1" |
10" |
192" |
1350 |
3.55 |
9691-321-0001 |
1/2"x1" |
10" |
192" |
1750 |
3.95 |
Please Note: Maximum working tension per foot of belt width
given for drum driven applications only.
All heavy duty belts have the following dimensions:
Flat strip = 1/2" wide x .062" thick round edge.
Connector rod = 6 gauge (.192" diameter) - high tensile
strength.