Sure and Secure Safety Stair Treads Architectural Specifications:
• Provide Sure and Secure Safety Stair Treads type 232 safety nosings as produced by The Mat King a d/b/a of Geoffrey Drew Marketing, Inc., for interior and exterior stairs.
• Nosing base shall be type 6063-T5 extruded aluminum.
• Anti-slip filler shall contain not less than 65% virgin grain Aluminum Oxide/Silicon Carbide abrasive.
• Nosings shall be noncombustible as tested under Federal Test Method Standard No. 501a. Method 6411.
• Type of anchor shall be specified.
• Nosings shall terminate not more than 4" from ends of steps for poured concrete stairs; for concrete filled steel pan stairs, nosings shall be full length of steps less 1/8" clearance.
• Color shall extend uniformly throughout the filler; black color will be furnished if no other color is specified.
• Nosings shall finish flush with the top of the traffic surface.
.
Guidelines for the Installation of Sure and Secure Safety Stair Treads or Nosing into New Concrete or Steel Pan Filled Stairs:
• The use of very large aggregate in the concrete mix may make placement of the safety nosing difficult.
• Safety nosing placement may be difficult in concrete with very slow slump.
• Place concrete into the stair forms or steel pans as quickly as possible; schedule pours so as to install the metal safety nosings quickly before initial set of concrete occurs.
• Puddle the concrete, tamp the safety nosing to insure proper concrete formation around the anchors.
• Remove protective tape (if used) as soon as practical.
• Order nosings or treads well in advance of the pour or installation date.
• Close stairway after pour; permit no use for 24 hours.
Back to Sure and Secure Safety Treads Intoduction
Site Map: The Mat King Web Site in Overview
THE
MAT KING
740 West End Avenue; Suite 1
New York, NY 10025 USA
Phone: (646)998-4208
Fax: (646)998-4073
Phone: 800-442-6544
Fax: 800-Mats-Fax (628-7329)
Phone: 800-442-6544
Fax: 800-Mats-Fax (628-7329)
|
||||