|
Ice Breaker Car and
Truck Traction Mat just what you would
want to have when your car or truck gets stuck in compacted snow or
ice. It is made from tough stuff: 3/4" thick rubber and heavy duty
steel nuts and bolts. The rubber base also features a beveled edge on
one end to enable a smooth and easy transition onto the Ice Breaker
Car Traction Mat.
The 8" x 24" size works for cars,
vans and dual-wheeled trucks.
 |
| Ice
Breaker Car and Truck Traction Mats
are an essential emergency kit component for any automotive vehicle.
Ice Breaker Car and
Truck Traction Mats are as essential
for winter travel as snow tires.
Ice Breaker Car and Truck Traction
Mats are just the right traction aid for automotive
vehicles stuck on ice or compacted snow.
Ice Breaker Car and
Truck Traction Mats are avaialable in
several widths for cars, vans, trucks, dual-wheeled trucks, motor homes
and tractors.
|
1. Steel-Studded Rubber Traction Mat.
2. Better traction when stuck on snow and ice.
3. Beveled end for easy run-up.
4. Stores easily in trunk or under seat.
5. 10-year warranty. |
|
| 
|
|
| Side view
of properly deployed Ice Breaker Mat |
Overhead
view to show teeth and ribs |
|
|
|
Two
Ice Breaker Mats stacked to show their teeth
|
Beveled
Edge and teeth-down deployment |
| |
| Instructions |
| 1. Turn
off the engine of the vehicle and engage the emergency brake. |
| 2. Place
the extended studded side of the mats down on the ice or compacted
snow. |
| 3. Place
the beveled (tapered) edge end under the drive wheels to be used.
i.e. For rear wheel drive vehicles, place the mats under the rear
wheels. For front wheel drive vehicles, place mats under the front
wheels. |
| 4. Center
the mats on each tire in line with the tire tracks in front or behind
the wheels, depending on the direction needed to free the vehicle. |
| 5. Start
the engine and release the emergency brake and drive VERY SLOWLY
up onto the Ice Breaker Mats, and, as pressure is applied, the studs
projecting down will dig into the ice and snow and the vehicle will
be freed. |
| WARNING:
To avoid possible injury, no one should stand directly behind or
in front of the vehicle when the mats are in use. |
| 6. Storage:
Brush and wipe steel studs clean of snow and ice after use. Store
dry or wrapped in heavy duty plastic or canvas bag to minimize rust
formation. |
|
|
| Ice
Breaker Car and Truck Traction Mat |
| Industrial
& Commercial Bulk Purchase Price Chart |
Please
Click HERE
for Residential Price Chart. |
| Product
Number |
Summary
Description |
Detailed
Description |
Price
per Pair |
| 7770-200-0824 |
Ice
Breaker 8"x24 for 25 to 49 pairs |
Ice
Breaker Car & Truck Traction Mats, 8"x24" Steel Studded 3/4" thick
recycled rubber; beveled end; 10-year warr; 14#/pr; $/pr 25-49 pr
(rack#: rsg-stm-8x24-2) |
$90.00 |
| 7770-300-0824 |
Ice
Breaker 8"x24 for 50 to 99 pairs |
Ice
Breaker Car & Truck Traction Mats, 8"x24" Steel Studded 3/4" thick
recycled rubber; beveled end; 10-year warr; 14#/pr; $/pr 50-99 pr
(rack#: rsg-stm-8x24-3) |
$80.00 |
| 7770-400-0824 |
Ice
Breaker 8"x24 for 100+ pairs |
Ice
Breaker Car & Truck Traction Mats, 8"x24" Steel Studded 3/4" thick
recycled rubber; beveled end; 10-year warr; 14#/pr; $/pr 100+ pr
(rack#: rsg-stm-8x24-4) |
$75.00 |
| Prices
are exclusive of shipping, which will be determined based on quantities
being ordered and destination. |
| Please
provide quantities of each size required, destination city, state
or province and Zip or Postal Code with contact phone and Fax numbers
and e-mail address with request for freight quotation. |
| Deliveries
to NY, CT and NJ will have applicable Sales Tax will be added to
final invoice. Resellers please provided resale certificate with
purchase orders. Thanks you. |
|
