| Backing: |
Premium composite rubber |
| Pile Height (± 0.5mm): |
0.18" |
| Total Height (± 7.5%): |
0.47" |
| Pile Weight (± 7.5%): |
44 oz/sy |
| Total Weight (± 7.5%): |
65 oz/sy |
| Sheet/Roll Width (± 2%): |
6' 7" or 13’ 2” |
| LIMITED WARRANTY |
| Full Commercial Warranty |
5 years |
| Summary of Warranty |
| Products must be professionally installed to validate the warranty. |
| Manufacturer warrants Yard Marker Double Ribbed Carpet MattingSheet/Roll Goods against wear for a period of 5 years in a commercial application. This warranty applies only to material that is properly installed and maintained, while being used as intended and recommended. If the defect is covered by this warranty and is reported to The Mat King within the Warranty period, the manufacturer will supply new material of same or similar grade to repair or replace the defective material. |
| |
| • Wear Defned as complete removal of wear layer, pattern and color due to wear from normal traffc and maintenance. If the wear occurs within 5 years from date of purchase, van Gelder, Inc. will provide replacement materials or repair, of only the effected area. |
| |
| • Manufacturing Defects manufacturer warrants Yard Marker Double Ribbed Carpet Matting materials are free from manufacturing defects and will replace defective floor covering and reasonable installation costs for a period of up to one [1] year from date of purchase. van Gelder, Inc. will not pay labor costs to repair or replace materials that defects were apparent before or at the time of installation. |
| |
| • Other Limitations |
| • This warranty is non-transferable |
| • Manufacturing defect must be reported within 3 months from date of purchase. |
| • This Warranty covers only properly installed & maintained floors |
| • Manufacturer excluded and will not pay for any consequential or incidental expenses. |
| •Manufacturer reserves the right of fnal judgment and may refuse claims in certain instances. |
| *For a copy of the full warranty please ask for a warranty sheet |
| |
TECHNICAL SPECIFICATIONS
| Dimensional Stability (ASTM D7570-09): |
Pass |
| Electrostatic Propensity (EN 1815): |
>2kV |
| Electrical Resistivity (IBM / ICL): |
Pass, for R.H. ≥40% |
| Sound Insulation (ISO 10140-1:2010): |
≥21dB |
| Thermal Retention (ISO 11092): |
0.15 m K/W Pass |
|
| COLOR FASTNESS |
| To Light (ISO 105 B02): |
5 |
| To Water (ISO 105 E01): |
5 |
| To Shampoo (ISO 105 C06): |
4-5 |
| To Rubbing (ISO 105 X12): |
4 (Dry), 3-4 (Wet) |
|
| |
| FLAMMABILITY RATING |
| Smoke Density (ASTM E662) |
Pass |
| Surface Flammability (FF 1-70 / ASTM D2859) |
Pass |
|
| LEED-NC |
MR Credit 4 | IEQ Credits 4.1, 4.3, 5 |
|
| MAINTENANCE |
Regular vacuuming (Weekly in low-traffc areas, and daily or twice daily in areas with higher traffc) with a motor-driven brush and beater bar can remove up to 80% of surface dirt, and is the easiest way to prolong the life of your carpet.
Regular vacuuming is key to maintaining your carpet, but eventually the carpet color dulls from dirt and grime stuck in the fbers. The dirt is then carried further into the building to form more soil reservoirs. Additionally, the oil content (15%) of the soil causes particles to stick to carpet fber and resist vacuuming. To restore the carpet to its best condition, frequent light cleaning gives the best result and is often very cost effective. *For more information, plus instructions for stain removal, please contact The Mat King. |
| |
| PACKING & DIMENSIONS |
| Sheet/Roll Width (± 2%): |
6’-7” or 13’-2" |
|
| |
|
| |
