Search Our Site

Key Component Vinyl Strip Doors & Curtainwalls
Here is How to Contol Local Environmental Areas Against Costly or Dangerous and Invasive Elements.

    Key Component Vinyl Strip Doors & Curtainwalls - Strip Doors are used throughout industrial, commercial and institutional structures, both indoors and outdoors.

Users are able to see right through strip doors. They are also able to walk right through strip doors without having to open them or even having to close them. And, amazingly, users can actully drive vehicles right through strip doors made for that purpose.

 

Key Component Vinyl Strip Doors & Curtainwalls are composed of a series of overlapping flexible vinyl strips that are transparent, odorless and non-toxic. The type of flexible vinyl strips chosen for each application is based on the type of traffic the doorway to be serves will typically experience. In practice, when someone passes through a strip door the strips will seperate or part from their overlapping positions but only just enough to let a person or a vehicle pass through. The remainder of the overlapping strips in the strip door configuration remain in place and overlapped thus leaving that part of the doorway effectively closed. Once the user or the vehicle passes completely through the doorway the vinyl strips that had parted fall right back into place automatically. The result is an absolute minimum loss of expensive heated or cooled air on one side of the doorway or the other. Similarly, if on one side of the doorway there is an active spraying of liquid going on the overlapping vinyl strips are tough and sturdy enough to contain the sprayed liquid on the side where it belongs with minimal amounts reaching beyond into the other side of the door way. The strips are also sellected to be able to withstand the constant and continual impact of heavy equipment pasing through.

 

Key Component Vinyl Strip Doors & Curtainwalls reduce the amount of air that can escape while a person or vehicle is passing through the doorway. During the summer months, this keeps filtered and conditioned cooled air inside and reduces humidity, while during the winter months, it prevents frigid air from entering and costly heated air from escaping. It reduces compressor running times in walk-in coolers and freezers by as much as 45 percent which results in saving additional energy expenditures.

 

Key Component Vinyl Strip Doors & Curtainwalls cut the cost of operating air-filtration systems by sealing out dust, dirt, fumes, smoke and airborne contaminants. Removing these particulates also minimizes clean-up costs, enhances the appearance of the facilities in which they are located and will help organization meet the OSHA employee safety standards.

Key Component Vinyl Strip Doors & Curtainwalls reduce the transmission of sound considerably whether they are being used as a door, a room divider or both. Key Component Vinyl Strip Doors & Curtainwalls ability to control acoustics and dampen noise can often help a facility meet OSHA noise requirements at a fraction of the cost of building a sound-deadening structure. When used around noisy machinery, the transparent Key Component Vinyl Strip Doors & Curtainwalls strips offer high visibility and easy access to the equipment while containing and dampening the machine's unavoidable noise.

 

Details - Key Component Vinyl Strip Doors & Curtainwall material is available three ways:

  1. Strip doors made to your requirements, including easy to install mounting hardware.
  2. Bulk Rolls of vinyl strip for those who prefer to make their own plastic strip doors. Use the recommendations below to help you determine proper gauge, width and overlap.  Door Mounting Hardware can also be purchased separately.
  3. Individual Strips to replace worn or damaged strip.
Application Guidelines
Thickness
Width

Overlap

For lightweight traffic closures only, such as conveyor doors (not for exterior openings).
.060"
6"
Full (3")
For freezers, coolers, refrigerated trucks and personnel doors.
.080"
8"
2"
For interior doors to 10' high. Not recommended for exterior opening.
.080"
8"
Full (4")
For minimum protection for interior/exterior openings from 9' to 14' high.
.120"
12"
4"
For better protection for interior/exterior openings from 9' to 14' high, severe temperature and windy conditions.
.120"
12"
Full (6")

For exterior doors up to 25' high with heavy vehicular traffic.

.160"
16"
4"

For exterior doors up to 25' high with constant heavy-duty equipment traffic. Best for sound control. Not recommended for frequent personnel traffic.

.160"
16"
Full (8")

Key Component Vinyl Strip Doors & Curtainwalls
Product Number Detailed Description
Price / each
5022-111-0307 Key Component Vinyl Strip Door; Standard FLAT strips; 3' W x 7' H; strip 8" W x .080" thick; 50% strip overlap; 21#; includes hardware (rack#: 3-7U-8P)
$160.35
5022-111-0407 Key Component Vinyl Strip Door; Standard FLAT strips; 4' W x 7' H; strip 8" W x .080" thick; 50% strip overlap; 28#; includes hardware (rack#: 4-7U-8P)
$207.29
5022-111-0408 Key Component Vinyl Strip Door; Standard FLAT strips; 4' W x 8' H; strip 8" W x .080" thick; 50% strip overlap; 31#; includes hardware (rack#: 4-8U-8P)
$230.76
5022-111-0607 Key Component Vinyl Strip Door; Standard FLAT strips; 6' W x 7' H; strip 8" W x .080" thick; 50% strip overlap; 39#; includes hardware (rack#: 6-7U-8P)
$316.80
5022-111-0608 Key Component Vinyl Strip Door; Standard FLAT strips; 6' W x 8' H; strip 8" W x .080" thick; 50% strip overlap; 44#; includes hardware (rack#:: 6-8U-8P)
$342.22
5022-111-0808 Key Component Vinyl Strip Door; Standard FLAT strips; 8' W x 8' H; strip 8" W x .080" thick; 50% strip overlap; 58#; includes hardware (rack#: 8-8U-8P)
$479.11
5022-111-0810 Key Component Vinyl Strip Door; Standard FLAT strips; 8' W x 10' H; strip 8" W x .080" thick; 50% strip overlap; 68#; includes hardware (rack#: 8-10-U-8P)
$574.93
5022-111-1010 Key Component Vinyl Strip Door; Standard FLAT strips; 10' W x 10' H; strip 8" W x .080" thick; 50% strip overlap; 83#; w/hardware (rack#: 10-10U-8P)
$704.00
5022-222-0810 Key Component Vinyl Strip Door; Standard FLAT strips; 8' W x 10' H; strip 12" W x .120" thick; 66% strip overlap; 107#; w/hardware (rack#: 8-10U-12P)
$792.00
5022-222-1010 Key Component Vinyl Strip Door; Standard FLAT strips; 10' W x 10' H; strip 12" W x .120" thick; 66% strip overlap; 135#; w/hardware (rack#: 10-10U-12P)
$993.42
5022-222-1212 Key Component Vinyl Strip Door; Standard FLAT strips; 12' W x 12' H; strip 12" W x .120" thick; 66% strip overlap; 185#; w/hardware (rack#: 12-12U-12P)
$1,361.07
Prices are exclusive of shipping and applicable sales tax if any. Please provide name, company name, contact phone number, e-mail address, destination city, state and Zip Code along with type, size and quantity of Key Component Vinyl Strip Door desired and we will get back to you with a formal proposal for you consideration. Thank you.
 
Guide for determining the strip quantity
required for your enclosure
  • 6" wide strip with 2" overlap; multiply sq. ft. of opening by 3.0
  • 8" wide strip with full (4") overlap; multiply sq. ft. of opening by 3.0
  • 16" wide strip with a 4" overlap; multiply sq. ft. of opening by 1.0
  • 6" wide strip with full (3") overlap; multiply sq. ft. of opening by 4.0
  • 12" wide strip with a 4" overlap; multiply sq. ft. of opening by 1.5
  • 16" wide strip with a full 8" overlap; multiply sq. ft. of opening by 1.5
  • 8" wide strip with 2" overlap; multiply sq. ft. of opening by 2.0
  • 12" wide strip with a full (6") overlap; multiply sq. ft. of opening by 2.0
 

On WALL MOUNT installations, remember to allow an extra 3" on top and 6" on each side to the measure of the door.

Information and specifications subject to change without notice

Key Component Vinyl Strip Door & Curtainwall bulk roll material please click HERE.

 
 
 

THE MAT KING
740 West End Avenue; Suite 1
New York, NY 10025 USA

Phone: 646-998-4208
Fax: 646-998-4073
Phone: 800-442-6544
Fax: 800-Mats-Fax (628-7329)

www.geoffreydrewmarketing.com www.geoffreydrewmarketing.com