Big
D Shower Matting
Shower Room & Shower Stall Slip & Fall
Prevention |
|
Big
D Shower Matting is comprised
of interlocking tiles with wide holes that provide free
and easy draining for water, soap, shampoo and lotions
where dependable sure footing is essential. Institutions
and public facilities that want to minimize the likelihood
of accident, injury and disease can use the Big D Matting
System to do just that. Beveled safety edges can be supplied
in contrasting colors for added safety.
|
|
Crafted from recycled plastic,
Big D Shower Matting is an interlocking roll-up matting system
designed for ground conditions where footing can be difficult
or dangerous. It is available in a variety of patterns and
colors, is simple to install, is free draining and easy to
clean.
|
|
Barefoot Drain Tile System
- was designed to prevent the growth of micro-organisms
which cause skin disease such as athletes foot and tinea.
The rubber and PVC material is impregnated with an anti-microbial
additive. It can be used to create a healthier environment
in sports locker rooms, shower facilities and swimming pool
areas while, at the same time, providing a sure grip for wet
feet. |
|
|
|
Colors: Black, Grey, Blue, White,Green, Yellow, Red |
|
Temperature: Suitable for use in temperatures ranging from
-86F (-30C) to +184F (+90C).
Material: Rubber and flexible PVC.
Packaging: Packed in boxes of 20 tiles with
the box size being 20-3/8"(515 mm) long x 20-3/8"(515
mm) wide x 6"(150 mm) high. A full 20 ft. container hold
approximately 14,600 tiles. |
|
Dimensions:
Tile: 20"x 10"x 9/16" (500 mm x 250
mm x 15 mm). Edge: 20"x 2-1/2"x 9/16" Corner
Edge: 22"x 2-1/2"x 9/16". Dimensions are
nominal.
Installation: For
easy interlocking of tiles and edge ramps apply soapy water
to male and female lugs and tap together with a hammer.
For permanent fixture apply a small amount of PVC glue or
cement to the lugs before interlocking. Assembly can be
Plain, matching similar dimension to similar dimension;
Parquet or Brick.
In Brick Style applications
tiles at the opposite ends of alternating row will need
to be cut in half and the cut away pat used on the opposite
row end. Edge Ramps can not be attached to cut tiles unless
lugs on the ramps are also cut away and PVC cement is used
to attach the ramp.
|