Architectural Specifications:
Page 1 of 1 | © FLEXCO Corporation, Printed in the U.S.A. | March 8, 2019
1. PRODUCT NAME: Vinyl Flooring Accessories, #156
2. PRODUCT DESCRIPTION: Co-Extruded Thermoplastic formulation designed to provide excellent resistance to scuffing and gouging while meeting ADA recommendations for transitions different flooring surfaces.
3. TECHNICAL DATA: ASTM E 648 (NFPA 253) - Class 1 ASTM E 662 (NFPA 258) - Passes
4. LEED INFORMATION: May contribute to LEED® CI and NC credits MR 4, MR 5 and MR 6.
5. INSTALLATION: Maintain the installation area, accessories, and adhesive between 65º F and 85º F for at least 48 hours before installation, duringinstallation, and after the installation. Use only on structurallysound interior wall surfaces such as dry plaster, cured drywall,exterior grade plywood, concrete and masonry that are clean, smooth, dry and structurally sound. All surfaces must be free frommoisture, alkali, old adhesive, dust dirt, wax, oil, grease, loose paint or plaster, nonporous wall coverings or paints and other extraneous coatings or materials that could prevent a successful bond. Any rough or uneven surfaces may telegraph through the wall base. Refer to Vinyl Flooring Accessories Installationinstructions for detailed information
6. ADHESIVES: Use an adhesive designed for the application of accessories. Adhesive should be a hard-set adhesive that does not allow the material to shrink or expand after installation. Flexco does not recommend the use of “stair tread” installation tape as an adequate adhesive for the installation of Flexco Vinyl Flooring Accessories.
This material can allow the material to shrink or expand and create gapping. It is up to the installer to determine acceptable bond to prevent shrinking and expansion.
7. PRODUCT MAINTENANCE:
Use an adhesive designed for the application of accessories. Adhesive should be a hard-set adhesive that does not allow the material to shrink or expand after installation. Flexco does not
recommend the use of “stair tread” installation tape as an adequateadhesive for the installation of Flexco Vinyl Flooring Accessories. This material can allow the material to shrink or expand and create gapping. It is up to the installer to determine acceptable bond to prevent shrinking and expansion.
8. AVAILABILTY AND COST: The Mat King.
9. LIMITED WARRANTY: Limited One (1) Year Manufacturer’s Warranty
Site Map: The Mat King Web Site in Overview
 |
 |
 |
THE
MAT KING
740 West End Avenue; Suite 1
New York, NY 10025 USA
Phone: (646)998-4208
Fax: (646)998-4073
Phone: 800-442-6544
Fax: 800-Mats-Fax (628-7329)
Phone: 800-442-6544
Fax: 800-Mats-Fax (628-7329)
|
||||
|
