3M Stay-in-Place Industrial Matting Tape 200

3M^TM Stay-in-Place Industrial Matting Tape 200
Holds work area matting securely in place.

3M^TM Stay-in-Place Industrial Matting Tape 200 Product Specifications

Back to 3M Cushion Matting Index Page

3M^TM Stay-in-Place Industrial Matting Tape 140
Product Number	Description	Detailed Description	Price/Case
2358-100-0210	3M Stay-in-Place Industrial Tape 200	3M Stay-in-Place Industrial Matting Tape 200, roll = 2 in x 10 ft; 1-roll/case; 1.5#/case; 0.21 cubes; 180 cases/pallet; $/case (rack#: 000-48011-263441)	$192.10

Prices are F.O.B. point of shipment with transportation charges prepaid via lowest cost routing destination within the continental limits of the United States. Prices for Alaska, Hawaii and Puerto Rico available on request. Prices for orders between $2,000 and $3,999 in full case quantities are INCLUSIVE of freight charges but will be assessed a 10% handling charge. Prices for orders between $250 and $1,999 are INCLUSIVE of freight charges but will be assessed a 15% handling charge. Orders under $250 are EXCLUSIVE of freight charges and will be assessed a $25 handling charge. Shipment to NY, NJ or CT will have State Sales Tax added to the final invoice.

3M™ Stay-In-Place Industrial Matting Tape 200 offers an easy solution to the problem of work area mat movement in industrial settings – a solution that’s quicker and less damaging to floors than using screws or glue.

Application is as easy as peeling away the adhesive liner and adhering the tape strip to the floor. Just place the 3M™ Safety-Walk™ Cushion Matting over the tape. Thick polyethylene “nubs” on the top surface of the tape grab and hold the matting securely in place. Mats can be easily removed for cleaning and replacing.

• Heavy-duty mat-grabbing product for use in industrial and manufacturing areas.

• Features Scotch® 300LSE Hi Strength Adhesive, designed to adhere to even the most demanding industrial/manufacturing floor surfaces.

• For those challenging industrial environments, helps prevent unsightly mat folds and bunching that can also cause trip-and-fall accidents.

• Allows easy mat removal for cleaning and replacing.

• For use in dry industrial/manufacturing areas on smooth flooring or decking and on diamond plate surfaces.

• Not intended for areas with frequent motorized equipment or heavy cart traffic. Also not intended for wet areas or where there is extended exposure to solvents.

• Application should be on clean, warm and dry surfaces.

• Part of the 3M™ Stay-In-Place Matting Tape family of products.

Product Specifications

Material
Adhesive (with liner) on floor side and thick polyethylene “nubs” (posts) on the matting side.

Size
• 4 inches x 20 feet
• 10 cm x 609 cm

Thickness (typical):
Test Method
ASTM D418-68
Value
0.035 inches (0.89 mm)

Minimum application temperature: 40 F (4 C)

Transportation: Prices are F.O.B. point of shipment with transportation charges prepaid via lowest cost routing destination within the continental limits of the United States. If customer chooses a different freight company, customer incures the difference in freight charges. Prices for Alaska, Hawaii and Puerto Rico available on request.

Shipment to NY, NJ or CT will have State Sales Tax added to the final invoice.

Warranty and Limited Remedy: Product will be free from defects in material and manufacture. 3M MAKES NO OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If product is defective, customer's exclusive remedy shall be, at 3M's option, replacement or repair of the 3M product or refund of the purchase price of the 3M product.

Limitation of Liability: 3M nor it's distributor, Geoffrey Drew Marketing, Inc. d/b/a The Mat King, shall not be liable for any losses or damages, whether direct, indirect, special incidental, or consequential regardless of the legal or equitable theory asserted, including contract, negligence, warranty, or strict liability.

Back to 3M™ Matting Accessories Introduction

Back to 3M™ Mats and Matting Index

Back to Industrial Mats and Matting

Site Map: The Mat King Web Site in Overview

THE MAT KING
740 West End Avenue; Suite 1
New York, NY 10025 USA

Phone: 646-998-4208
Fax: 646-998-4073
Phone: 800-442-6544
Fax: 800-Mats-Fax (628-7329)