Four Score Elevator Pad Stud Catcher
What? Me measure? Not no more! We're gettin' Stud Catcher.

Four Score Elevator Pad Stud Catcher - Ugh! Perhaps the hardest thing about ordering new protective wall pads for an elevator is making certain that the grommet holes get sewn into the pads exactly where then must be located to fit exactly over the wall studs. Becasue of that, we often liken ordering elevator wall pads to making a wedding dress. It has to be perfect.

With Four Score Elevator Pad Stud Carcher, that bitting of the nails is history. Do we need to get a ladder and climb up into the upper most heights of our elevator cabs and gingerly measure for the absolute dead center of each and every wall stut from way over at the wall to the left and then from way up at the top of the ceiling to the absolute dead center of the stud and again and then check it and then ... Ugh! That was the drill. We all had to do it, or get some one to do it for us. Not any more.

All we need to measure is the width of each wall and the height of the ceiling and, as far as the location of the studs is concerned, the Four Score Elevator Pad Stud Catcher will take care of the rest.

Cut outs for the key pads, security cameras and telephone access panels and the like still need to be proprely located as described on the Four Score Elevator Pad - How to Order page. But, not needing to measurte for studs any more is quite a relief. Take a look.

Four Score Elevator Pad Stud Catcher
Corner view wood panel wall		Detailed Diagram
Close-up view.

Elevator pads equipped with a Stud Catcher Border can be hung from existing wall studs without sewn-in grommet holes or use of additional hardware. Stud Catcher Border is made from heavy duty black slotted webbing that is sewn on to the top of either vinyl or canvas wall pads during fabrication. The use of a Stud Catcher Border eliminates the need for time consuming measuring and documenting of stud locations since the Stud Catcher Border features durable 5/8″ tall stud slits, which are spaced 1″ apart along its entire length and will usually conform to existing studs. Stud Catcher Border is not sold seperately. Patent pending.