ULTRASEAL ADHESIVE PART "B"
MATERIAL SAFETY DATA SHEET
MSDS
THIS ITEM HAS BEEN DISCONTINUED
THANK YOU
SECTION I -PRODUCT IDENTIFICATION
CHEMICAL FAMILY : Synthetic Urethane Polymer
TRADE NAME AND SYNONYMS : Ultraseal GEL Component B
FORMULA : The specific chemical formula for this material is a Trade Secret
of the manufacturer.
SECTION II -HAZARDOUS INGREDIENTS
INGREDIENT: TL VL
Polyol Mixture: N/ A
SECTION III-PHYSICAL DATA
APPEARANCE : Viscous Liquid
ODOR : Aromatic
COLOR : Clear Amber
BOILING POINT (F) (C) : 300 C
SPECIFIC GRAVITY : 1.00
PERCENT VOLATILE (by volume) : 0
EVAPORATION RATE (ether = 1) : N/A
VAPOR DENSITY (air = 1) : Greater
SOLUBILITY IN WATER : N/A
IMPORTANT:
The data in this Material Safety Data Sheets relates to the material designated
herein and does not relate to use in combination with any other material or
in any process. The information herein is furnished free of charge and is based
on the technical data that the manufacturer believes to be reliable, and to
the best of our knowledge, accurately reflects the properties and effects
of the hazardous components. This product is intended for use by persons having
technical skills and at their own discretion and risk. Because conditions of
use of this material are outside our control, we make no warranties, expressed
or implied, and assume no liability in connection with any use of this material.
SECTION IV -FIRE AND EXPLOSION HAZARD DATA
FLASHPOINT : 300 C. (T.C.C., ASTM 56-70)
FLAMMABLE LIMITS (Volume in air) : N/A
EXTINGUISHING MEDIA : Water Spray (fog), foam, dry chemical, carbon dioxide.
SPECIAL FIRE FIGHTING PROCEDURES: Full protective equipment with self-contained
breathing apparatus should be worn.
UNUSUAL FIRE & EXPLOSION HAZARDS: Keep containers tightly closed. Isolate
from heat as closed containers may explode when exposed to extreme heat. DO
NOT weld, burn or cut empty containers.
SECTION V -HEALTH HAZARD DATA
PHYSICAL HAZARDS : Slightly combustible liquid
ACUTE HEALTH EFFECTS (short term): Slight skin irritant
EYES: Slight eye irritant.
INHALATION : No data found.
SKIN ABSORPTION: No data found.
INGESTION: No hazard identified from data found.
CHRONIC HEALTH EFFECTS (long term): No chronic health hazards have been found
to be associated with this material.
EMERGENCY AND FIRST AID PROCEDURES:
EYES: Flush with large amounts of water for at least 15 minutes.
Seek medical attention immediately.
SKIN : Wash exposed area thoroughly with soap and water.
Be sure to wash contaminated clothing before reusing. Seek medical attention.
INHALATION : Get person into fresh air. Oxygen may be administered
if available and needed. Seek medical attention immediately.
INGESTION : DO NOT induce vomiting. Give glass of water or
milk to drink. DO NOT give anything by mouth to unconscious person. Seek medical
attention immediately.
SECTION VI -REACTIVITY DATA
STABILITY : Stable under normal conditions.
CONDITIONS TO AVOID: Contact with moisture, temperature above maximum storage
temperatures.
INCOMPATIBILITY (materials to avoid): N/A.
HAZARDOUS DECOMPOSITION PRODUCTS: High heat and fire; carbon monoxide, carbon
dioxide.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
SECTION VII -SPILL OR LEAK PROCEDURES
TAKE THE FOLLOWING STEPS IF MATERIAL IS RELEASED OR SPILLED:
Ventilate confined spaces. Workers should avoid direct skin or eye contact,
or inhalation of vapors. Absorb on dry inert material. Package for disposal.
WASTE DISPOSAL METHOD: Dispose of in accordance with local, state and federal
regulations.
SECTION VIll -SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION : N/A
VENTILATION REQUIREMENTS : N/A
EYE PROTECTION: Splash goggles or face shield required. A full face
shield is recommended for most situations as it affords eye as well as face
protection.
OTHER PROTECTIVE EQUIPMENT: Chemical resistant gloves, apron or coveralls.
SECTION IX -SPECIAL PRECAUTIONS
STORAGE TEMPERATURE : 100 F (38 C) maximum
SHELF LIFE : Minimum one (1) year at 75 F (23 C)
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING : Keep containers closed when
not in use. Store in tightly sealed containers and keep away from moisture and
direct sunlight.
OTHER : Wear personal protective equipment when working on equipment that may
be contaminated with material.
SECTION X -SHIPPING DATA
D.O.T. SHIPPING NAME : Coating Solution
TECHNICAL SHIPPING NAME : Polyurethane Resin
D.O.T. HAZARD CLASSIFICATION: N/A
D.O.T. LABELS REQUIRED: N/A
D.O.T. PLACARDS REQUIRED : N/A
FREIGHT CLASS : 1
LIMIT, AIR FREIGHT : Passenger or Air Cargo
To Ultraseal Adhesive Part "A" MSDS
Back to Ultraseal Adhesive Product Page
Site Map: The Mat King Web Site in Overview
|
